Difference between revisions of "Modeling tools"
m |
m |
||
| Line 30: | Line 30: | ||
=== Hydrogeosphere === | === Hydrogeosphere === | ||
* [http://www.aquanty.com/hydrogeosphere HydroGeoSphere] | * [http://www.aquanty.com/hydrogeosphere HydroGeoSphere] | ||
| + | |||
| + | === Petrel === | ||
| + | * [https://www.software.slb.com/products/petrel/petrel-geology-and-modeling Petrel] | ||
| + | |||
| + | === FRACGEN and NFFLOW === | ||
| + | * [https://edx.netl.doe.gov/dataset/fracgen-and-nfflow-version-14-9 FRACGEN and NFFLOW] | ||
| + | |||
| + | === FRACMAN === | ||
| + | * [http://fracman.golder.com/ FRACMAN] | ||
[[ Comparison of capabilities ]] | [[ Comparison of capabilities ]] | ||
Revision as of 12:06, 11 May 2016
Contents
Modeling tools
The following list shows some selected modeling tools that can be used for the simulation of fracture flow and transport. Their capabilities with respect to modeling flow and transport in fractured media are compared in the chapter Comparison of capabilities .
COMSOL Multiphysics
COMSOL Multiphysics® is a comprehensive modeling suite that can be used for computing flow and transport in limestone aquifers. It provides predefined physics-based interfaces (e.g. a module for subsurface flow) and allows equation-based modeling, where arbitrary partial differential equations can be solved. Different physics can be coupled. The toolbox provides tools for mesh generation, a user interface for the simulation setup, several solvers and visualization and post-processing tools.
Discretization methods etc.
For the modeling of flow in fractures, there is a predefined physics interface available. It is also possible to implement the flow and transport equation as partial differential equations and to add fracture flow and transport using a feature called "Weak contributions". Here is an instruction file which describes how to setup a 2-dimensional model including fracture flow and transport in COMSOL Multiphysics.
More details can be found on the COMSOL webpage:
FEFlow
FEFlow is a simulator for groundwater flow and transport of contaminants, groundwater age and heat. It comprises mesh generators, solvers and post-processing tools for visualization etc. It facilitates the computation of porous medium flow and transport in 2D and 3D aquifers, which can be confined, semi-confined or unconfined. Discrete fractures can be included. (Hydro-)geologic data can be easily imported.
Hydrogeosphere
Petrel
FRACGEN and NFFLOW
FRACMAN
Useful helpers
Besides the comprehensive models, there are several small tools available that can be helpful when dealing with contaminant transport in limestone aquifers. Some will be described in the following.
Matlab model based on the semi-analytical algorithm presented in Christ and Goltz, 2002
Contaminated sites can often pose a threat to water suppliers. Christ and Goltz have developed a semi-analytical algorithm that allows estimating the capture zones of extraction wells. We have set up a simple Matlab model based on the algorithm from Christ and Goltz, which requires only a few parameters to estimate the capture zone of a production well. This can be very useful to get a quick estimate, if a contaminant is likely to flow towards a drinking water well, for example.
Required parameters
Following parameters are required to set up and run the model:
- Estimate of the hydraulic conductivity
- Average hydraulic gradient of the natural groundwater flow
- Reference head at one point in the domain
- Direction of natural groundwater flow
- Aquifer thickness
- Location of wells
- Pumping rates of the wells in the study area
The model computes streamlines and isopotentials for the given parameters. When a background map of the study area is specified, the streamlines and isopotential lines are directly plotted on the map, as shown in the example below.
The semi-analytical solution is described in the paper by Christ and Goltz, J. Hydrology, 2002, p. 224-244. [1].
A Matlab example file can be seen here:
The example including the background map shown above can be downloaded as zipfile here:
Aqtesolv
Aqtesolv is an easy-to-use tool for the design and interpretation of aquifer tests like pump tests and slug tests. It provides a variety of conventional solution methods for aquifer tests in confined, leaky and unconfined aquifers and several advanced methods, e.g. for fractured aquifers or oscillating water tables. A comprehensive description of the capabilities and a free demo version is available on the software's webpage. The software tool contains a comprehensive help menu that provides explanations of the different solution methods and the required parameters.
Return to Overview
