Difference between revisions of "Conceptual modeling"
m |
m (→Geologic model) |
||
| Line 12: | Line 12: | ||
=== Geologic model === | === Geologic model === | ||
| − | + | Setup of a geologic model based on larger scale geology, borehole information, borehole cores, geophysical measurements etc. | |
[[File:Geology_Akacievej_GEO_extended.png|600px| Geology at the Akacievej site]] | [[File:Geology_Akacievej_GEO_extended.png|600px| Geology at the Akacievej site]] | ||
Revision as of 09:06, 16 September 2016
Contents
The field site: Akacievej, Hedehusene
Description of the field site, spill history, overview
- Former dry cleaning facility in Denmark (1973-2003)
- PCE spill in 1976 → dissolved plume with ca. 400 m length
- Excavation of most polluted soil (DNAPL) in 2006
- Installation of a pump-and-treat remediation system in 2007: pumping with 2.5 m3/h, treatment with activated carbon and reinfiltration
Conceptual model development
The setup of the conceptual model for the Akacievej field site is going to be explained.
Geologic model
Setup of a geologic model based on larger scale geology, borehole information, borehole cores, geophysical measurements etc.
Flow field
Measurement campaign to determine groundwater flow field in the larger plume area. An extent larger than the plume is beneficial to setup flow models with little influence of the boundaries on the flow field.
Determine aquifer parameters
Pumping test, slug tests, tracer tests, waterworks measurements, remediation system, outcrops etc.
Contaminant distribution and dynamics
PCE concentration measurements before, during and after the pumping test, combined with previous investigations. Modeling interpretations and conceptual model of the plume propagation.
Return to Content
