Model setup
Model setup for fracture flow and transport in limestone aquifers
This chapter gives step-by-step instructions for the setup of a model to simulate flow and transport in a fractured limestone aquifer. The following steps will be described:
- Formulation of modeling objective
- Delineation of model domain
- Construction of conceptual model
- Data acquisition - measurements to obtain specific model parameters
- Choice of initial and boundary conditions
- Flow chart giving an overview of the individual steps
The typical workflow will be demonstrated using an example field site close to Copenhagen. Example: Setup of models for a field site (Akacievej, Hedehusene)
Return to Overview
